Tak jsem nahrál nový fw, jednotky jsou už od posledně v tom pseudo duplexu. Pásmo 5,8 GHz (country se musí nastavit na US, aby se dalo vybrat), nastaveno na SuperA with static turbo, tj. se dá zvolit jeden kanál ze dvou, takže na každý "směr" jeden.
První test - ftp upload na server (pc je WinXP, 3GHz P4, server to samé na debianu).
rychlost 5809 KB/sec, ping průměr 4ms, max. 7ms - použit textový ftp klient ve windows a windows standardní ping.
Druhý test - ftp download
rychlost 6032 KB/sec, ping 9ms, max. 14ms
Třetí test - ftp zaráz
4000 down/2300+ up, ping 14ms (nevyrovnanost je spíš komplama a diskem)
Čtvrtý test - iperf -w 64K mezi dvěma winxp mašinami
jedním směrem cca. 50 Mbit/sec, ping 10 ms
oběma směry 28-30/28-30, ping 16 ms, max. 44
__________________
předseda Sdružení Tišnet, http://www.cipis.net
Naposledy upravil cipis 26.09.2008 v 12:35
25.09.2008 v 20:53
cipis
Senior Member
Registrován: 23.01.2003
Příspěvků: 4997
Re: nový firmware pro dual radio Access Point WLA-9000AP
me ta 9000 chodila vicemene stejne kolem 50 jednim smerem, kdyz se zatizi oba zaroven davalo to 2x35, podle mne pomaly procak, ktery nestiha agregaci paketu na L2, z hlavy to presne nevim a o pul noci to hledat nebudu, ale chci udelat nejake testy venku i s betaverzí fw (mam novou, nepublic, takze ji neposlu, nepiste nemuzu).
co se tyka legalnosti, vzdycky jsem to testoval v super A bez urba, to je legalni.
ps: viktore, kdyz tomu nerozumis, nerypej do toho, pak ti to chodit bude. uz jsi prodal sve vyborne switche Dlink, co sis koupil na 150M linku nedbaje rady a cizího slova CISCO?